196 lines
9.9 KiB
Plaintext
196 lines
9.9 KiB
Plaintext
// Copyright (c) 2008 DMTF. All rights reserved.
|
|
[Version ( "2.18.0" ),
|
|
UMLPackagePath ( "CIM::Physical::Package" ),
|
|
Description (
|
|
"The PhysicalPackage class represents PhysicalElements that "
|
|
"contain or host other components. Examples are a Rack "
|
|
"enclosure or an adapter Card." )]
|
|
class CIM_PhysicalPackage : CIM_PhysicalElement {
|
|
|
|
[Description (
|
|
"The RemovalCapabilites property is used to describe the "
|
|
"conditions under which a PhysicalPackage can be removed. "
|
|
"Since all PhysicalPackages are not removable, this "
|
|
"property defaults to 2, \'Not Applicable\'." ),
|
|
ValueMap { "0", "2", "3", "4" },
|
|
Values { "Unknown", "Not Applicable", "Removable when off",
|
|
"Removable when on or off" }]
|
|
uint16 RemovalConditions = 2;
|
|
|
|
[Deprecated { "CIM_PhysicalPackage.RemovalConditions" },
|
|
Description (
|
|
"The use of this property is being deprecated. Instead "
|
|
"RemovalConditions should be used. The RemovalConditions "
|
|
"property addresses whether a PhysicalPackage is "
|
|
"removable with or without power being applied. \n"
|
|
"A PhysicalPackage is Removable if it is designed to be "
|
|
"taken in and out of the physical container in which it "
|
|
"is normally found, without impairing the function of the "
|
|
"overall packaging. A Package can still be Removable if "
|
|
"power must be \'off\' in order to perform the removal. "
|
|
"If power can be \'on\' and the Package removed, then the "
|
|
"Element is both Removable and HotSwappable. For example, "
|
|
"an extra battery in a laptop is Removable, as is a disk "
|
|
"drive Package inserted using SCA connectors. However, "
|
|
"the latter is also HotSwappable. A laptop\'s display is "
|
|
"not Removable, nor is a non-redundant power supply. "
|
|
"Removing these components would impact the function of "
|
|
"the overall packaging or is impossible due to the tight "
|
|
"integration of the Package." )]
|
|
boolean Removable;
|
|
|
|
[Deprecated { "No value" },
|
|
Description (
|
|
"The use of this property is being deprecated because it "
|
|
"is redundant with the FRU class and its associations. A "
|
|
"PhysicalPackage is Replaceable if it is possible to "
|
|
"replace (FRU or upgrade) the Element with a physically "
|
|
"different one. For example, some ComputerSystems allow "
|
|
"the main Processor chip to be upgraded to one of a "
|
|
"higher clock rating. In this case, the Processor is said "
|
|
"to be Replaceable. Another example is a power supply "
|
|
"Package mounted on sliding rails. All Removable packages "
|
|
"are inherently Replaceable." )]
|
|
boolean Replaceable;
|
|
|
|
[Deprecated { "CIM_PhysicalPackage.RemovalConditions" },
|
|
Description (
|
|
"The use of this property is being deprecated. Instead "
|
|
"RemovalConditions should be used. The RemovalConditions "
|
|
"property addresses whether a PhysicalPackage is "
|
|
"removable with or without power being applied. \n"
|
|
"\n"
|
|
"A PhysicalPackage is HotSwappable if it is possible to "
|
|
"replace the Element with a physically different but "
|
|
"equivalent one while the containing Package has power "
|
|
"applied to it (ie, is \'on\'). For example, a disk drive "
|
|
"Package inserted using SCA connectors is both Removable "
|
|
"and HotSwappable. All HotSwappable packages are "
|
|
"inherently Removable and Replaceable." )]
|
|
boolean HotSwappable;
|
|
|
|
[Description ( "The height of the PhysicalPackage in inches." ),
|
|
Units ( "Inches" ),
|
|
PUnit ( "inch" )]
|
|
real32 Height;
|
|
|
|
[Description ( "The depth of the PhysicalPackage in inches." ),
|
|
Units ( "Inches" ),
|
|
PUnit ( "inch" )]
|
|
real32 Depth;
|
|
|
|
[Description ( "The width of the PhysicalPackage in inches." ),
|
|
Units ( "Inches" ),
|
|
PUnit ( "inch" )]
|
|
real32 Width;
|
|
|
|
[Description ( "The weight of the PhysicalPackage in pounds." ),
|
|
Units ( "Pounds" ),
|
|
PUnit ( "pound" )]
|
|
real32 Weight;
|
|
|
|
[Description (
|
|
"Enumeration defining the type of the PhysicalPackage. "
|
|
"Note that this enumeration expands on the list in the "
|
|
"Entity MIB (the attribute, entPhysicalClass). The "
|
|
"numeric values are consistent with CIM\'s enum numbering "
|
|
"guidelines, but are slightly different than the MIB\'s values.\n"
|
|
"Unknown - indicates that the package type is not known.\n"
|
|
"Other - The package type does not correspond to an "
|
|
"existing enumerated value. The value is specified using "
|
|
"the OtherPackageType property.\n"
|
|
"The values \"Rack\" through \"Port/Connector\" are "
|
|
"defined per the Entity-MIB (where the semantics of rack "
|
|
"are equivalent to the MIB\'s \'stack\' value). The other "
|
|
"values (for battery, processor, memory, power "
|
|
"source/generator and storage media package) are self-explanatory.\n"
|
|
"A value of \"Blade\" should be used when the "
|
|
"PhysicalPackage contains the operational hardware "
|
|
"aspects of a ComputerSystem, without the supporting "
|
|
"mechanicals such as power and cooling. For example, a "
|
|
"Blade Server includes processor(s) and memory, and "
|
|
"relies on the containing chassis to supply power and "
|
|
"cooling. In many respects, a Blade can be considered a "
|
|
"\"Module/Card\". However, it is tracked differently by "
|
|
"inventory systems and differs in terms of service "
|
|
"philosophy. For example, a Blade is intended to be "
|
|
"hot-plugged into a hosting enclosure without requiring "
|
|
"additional cabling, and does not require a cover to be "
|
|
"removed from the enclosure for installation. Similarly, "
|
|
"a \"Blade Expansion\" has characteristics of a \"Blade\" "
|
|
"and a \"Module/Card\". However, it is distinct from both "
|
|
"due to inventory tracking and service philosophy, and "
|
|
"because of its hardware dependence on a Blade. A Blade "
|
|
"Expansion must be attached to a Blade prior to inserting "
|
|
"the resultant assembly into an enclosure." ),
|
|
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
|
|
"10", "11", "12", "13", "14", "15", "16", "17" },
|
|
Values { "Unknown", "Other", "Rack", "Chassis/Frame",
|
|
"Cross Connect/Backplane", "Container/Frame Slot",
|
|
"Power Supply", "Fan", "Sensor", "Module/Card",
|
|
"Port/Connector", "Battery", "Processor", "Memory",
|
|
"Power Source/Generator",
|
|
"Storage Media Package (e.g., Disk or Tape Drive)",
|
|
"Blade", "Blade Expansion" },
|
|
MappingStrings { "MIB.IETF|ENTITY-MIB.entPhysicalClass" },
|
|
ModelCorrespondence { "CIM_PhysicalPackage.OtherPackageType" }]
|
|
uint16 PackageType;
|
|
|
|
[Description (
|
|
"A string describing the package when the instance\'s "
|
|
"PackageType property is 1 (\"Other\")." ),
|
|
ModelCorrespondence { "CIM_PhysicalPackage.PackageType" }]
|
|
string OtherPackageType;
|
|
|
|
[Description (
|
|
"An array of strings that identify the component that is "
|
|
"compatible with, and can be inserted in a slot that "
|
|
"reports this string as one of the array element in the "
|
|
"VendorCompatibilityStrings This allows system "
|
|
"administrators to determine whether it is appropriateto "
|
|
"insert a package into a slot \n"
|
|
"In order to ensure uniqueness within the NameSpace, each "
|
|
"value defined by the vendor for use in the "
|
|
"VendorCompatibilityStrings property SHOULD be "
|
|
"constructed using the following \'preferred\' algorithm: \n"
|
|
"<OrgID>:<LocalID> \n"
|
|
"Where <OrgID> and <LocalID> are separated by a colon "
|
|
"\':\', and where <OrgID> MUST include a copyrighted, "
|
|
"trademarked or otherwise unique name that is owned by "
|
|
"the business entity creating/defining the InstanceID, or "
|
|
"is a registered ID that is assigned to the business "
|
|
"entity by a recognized global authority (This is similar "
|
|
"to the <Schema Name>_<Class Name> structure of Schema "
|
|
"class names.) In addition, to ensure uniqueness <OrgID> "
|
|
"MUST NOT contain a colon (\':\'). When using this "
|
|
"algorithm, the first colon to appear in InstanceID MUST "
|
|
"appear between <OrgID> and <LocalID>. \n"
|
|
"<LocalID> is chosen by the business entity and SHOULD "
|
|
"not be re-used to identify different underlying "
|
|
"(real-world) elements." ),
|
|
ModelCorrespondence { "CIM_Slot.VendorCompatibilityStrings" }]
|
|
string VendorCompatibilityStrings[];
|
|
|
|
|
|
[Deprecated { "No value" },
|
|
Description (
|
|
"This method is being deprecated. A PhysicalPackage "
|
|
"cannot determine if it is compatible with another "
|
|
"object. The IsCompatible method verifies whether the "
|
|
"referenced PhysicalElement may be contained by or "
|
|
"inserted into the PhysicalPackage. The return value "
|
|
"should be 0 if the request was successfully executed, 1 "
|
|
"if the request is not supported and some other value if "
|
|
"an error occurred. In a subclass, the set of possible "
|
|
"return codes could be specified, using a ValueMap "
|
|
"qualifier on the method. The strings to which the "
|
|
"ValueMap contents are \'translated\' may also be "
|
|
"specified in the subclass as a Values array qualifier." )]
|
|
uint32 IsCompatible(
|
|
[IN, Description (
|
|
"The element to check for compatibility with this one."
|
|
)]
|
|
CIM_PhysicalElement REF ElementToCheck);
|
|
|
|
};
|