56 lines
5.9 KiB
Plaintext
56 lines
5.9 KiB
Plaintext
<StatusCodes>
|
|
<StatusCode Code="0" VendorCode="32768">Operation completed successfully.</StatusCode>
|
|
<StatusCode Code="1" VendorCode="32769">An internal error occurred while performing the operation.</StatusCode>
|
|
<StatusCode Code="3" VendorCode="32771">Specified mode of operation is invalid.</StatusCode>
|
|
<StatusCode Code="9" VendorCode="32777">Either an invalid name was entered or an Enterprise name was specified that was not pre-registered or the current registration was attempted from an interface different from the one used for the initial registration of the application.</StatusCode>
|
|
<StatusCode Code="10" VendorCode="32778">The application handle provided in the request message is not valid.</StatusCode>
|
|
<StatusCode Code="11" VendorCode="32779">The number of bytes requested cannot be allocated in ISV storage.</StatusCode>
|
|
<StatusCode Code="12" VendorCode="32780">Specified name is invalid.</StatusCode>
|
|
<StatusCode Code="13" VendorCode="32781">The specified block does not exist.</StatusCode>
|
|
<StatusCode Code="14" VendorCode="32782">The specified byte offset is invalid.</StatusCode>
|
|
<StatusCode Code="15" VendorCode="32783">The specified byte count is invalid.</StatusCode>
|
|
<StatusCode Code="16" VendorCode="32784">The requesting application is not permitted to request execution of the specified operation.</StatusCode>
|
|
<StatusCode Code="17" VendorCode="32785">The requesting application is not the owner of the block as required for the requested operation.</StatusCode>
|
|
<StatusCode Code="18" VendorCode="32786">The specified block is locked by another application.</StatusCode>
|
|
<StatusCode Code="19" VendorCode="32787">The specified block is not locked.</StatusCode>
|
|
<StatusCode Code="20" VendorCode="32788">The specified group permission bits are invalid.</StatusCode>
|
|
<StatusCode Code="21" VendorCode="32789">The specified group does not exist. </StatusCode>
|
|
<StatusCode Code="22" VendorCode="32790">The specified member count is invalid.</StatusCode>
|
|
<StatusCode Code="23" VendorCode="32791">No available storage in the specified structure.</StatusCode>
|
|
<StatusCode Code="24" VendorCode="32792">Specified Key algorithm is invalid.</StatusCode>
|
|
<StatusCode Code="26" VendorCode="32794">Specified DHCP mode is invalid.</StatusCode>
|
|
<StatusCode Code="27" VendorCode="32795">Specified IP address is invalid.</StatusCode>
|
|
<StatusCode Code="28" VendorCode="32796">Specified Domain name is invalid.</StatusCode>
|
|
<StatusCode Code="30" VendorCode="32798">The requested operation cannot be performed because a prerequisite request message has not been received.</StatusCode>
|
|
<StatusCode Code="32" VendorCode="32800">Specified provisioning state is not valid.</StatusCode>
|
|
<StatusCode Code="34" VendorCode="32802">Specified time is not valid.</StatusCode>
|
|
<StatusCode Code="35" VendorCode="32803">Specified index is not valid.</StatusCode>
|
|
<StatusCode Code="36" VendorCode="32804">Invalid input parameter.</StatusCode>
|
|
<StatusCode Code="37" VendorCode="32805">An invalid netmask was supplied (a valid netmask is an IP address in which all 1s are before the 0 e.g. FFFC0000h is valid, FF0C0000h is invalid).</StatusCode>
|
|
<StatusCode Code="38" VendorCode="32806">The operation failed because the flash wear-out protection mechanism prevented a write to an NVRAM sector.</StatusCode>
|
|
<StatusCode Code="2049" VendorCode="34817">Setting is not supported by this product._OEM_NUMBER</StatusCode>
|
|
<StatusCode Code="2050" VendorCode="34818">Setting is not supported by this product._BOOT_OPTION</StatusCode>
|
|
<StatusCode Code="2051" VendorCode="34819">The command specified in the remote control command is not supported by the Intel AMT device.</StatusCode>
|
|
<StatusCode Code="2052" VendorCode="34820">The special command specified in the remote control command is not supported by the Intel AMT device.</StatusCode>
|
|
<StatusCode Code="2053" VendorCode="34821">The handle specified in the command is invalid.</StatusCode>
|
|
<StatusCode Code="2054" VendorCode="34822">The password specified in the User ACL is invalid.</StatusCode>
|
|
<StatusCode Code="2055" VendorCode="34823">The realm specified in the User ACL is invalid.</StatusCode>
|
|
<StatusCode Code="2056" VendorCode="34824">The FPACL or EACL entry is used by an active registration and cannot be removed or modified.</StatusCode>
|
|
<StatusCode Code="2057" VendorCode="34825">Essential data is missing on CommitChanges() command.</StatusCode>
|
|
<StatusCode Code="2058" VendorCode="34826">The parameter specified is a duplicate of an existing value.</StatusCode>
|
|
<StatusCode Code="2059" VendorCode="34827">Event log is frozen.</StatusCode>
|
|
<StatusCode Code="2060" VendorCode="34828">Reserved for future use.</StatusCode>
|
|
<StatusCode Code="2061" VendorCode="34829">Reserved for future use.</StatusCode>
|
|
<StatusCode Code="2062" VendorCode="34830">Invalid RSA Key.</StatusCode>
|
|
<StatusCode Code="2063" VendorCode="34831">Invalid X.509 Certificate or invalid certificate handle.</StatusCode>
|
|
<StatusCode Code="2064" VendorCode="34832">Key pair does not match.</StatusCode>
|
|
<StatusCode Code="2065" VendorCode="34833">The FW allows storing an SID from a limited number of domains. This SID domain does not exist and there is no space to store a new domain.</StatusCode>
|
|
<StatusCode Code="2066" VendorCode="34834">Setting is not supported by this product.</StatusCode>
|
|
<StatusCode Code="2067" VendorCode="34835">Priority setting is invalid.</StatusCode>
|
|
<StatusCode Code="2068" VendorCode="34836">Unable to find specified element.</StatusCode>
|
|
<StatusCode Code="2069" VendorCode="34837">Invalid User credentials.</StatusCode>
|
|
<StatusCode Code="2070" VendorCode="34838">Passphrase is invalid.</StatusCode>
|
|
<StatusCode Code="2072" VendorCode="34840">Current functionality requires association to a Key Pair.</StatusCode>
|
|
<StatusCode Code="2075" VendorCode="34843">The command is defined in Audit Log policy as a critical event and cannot be logged.</StatusCode>
|
|
<StatusCode Code="2076" VendorCode="34844">One of the ME components is not ready .</StatusCode>
|
|
</StatusCodes> |